Devicenet cable planning and installation manual

Although the round thick cable and Class 1 flat cable are both rated to 8A, the cable system can support a total load of more than 8A. For example, a 16A power supply located somewhere in the middle of the cable system can supply 8A to both sides of the PowerTap™. Important: Read the DeviceNet Cable System Planning and Installa-tion Manual Publication in its entirety before planning and installing a DeviceNet system. If the network is not installed according to this document, unexpected operation and intermittent failures can occur. If this manual is not available, please contact either the local. DeviceNet. Title: deviceNet - Planning and Installation Manual Author: Phoenix Contact GmbH Co. KG Subject: deviceNet - Planning and Installation Manual Created Date: 11/21/ PM.

DeviceNet cable. Resistor connection can be verified by disconnecting DeviceNet power and measuring the resistance across the Can_H Can_L lines (Blue White Wire). This can be measured with an Ohm meter. The reading should be approximately 60 Ohms. Very Important: The DeviceNet network will not operate correctly without terminating resistors. Reference Manuals Important: Read the DeviceNet Cable System Planning and Installa tion Manual, Publication , in its entirety before planning and installing a DeviceNet system. If the network is not installed according to this document, unexpected operation and intermittent failures can occur. For DeviceNet cable system planning and installation information, refer to the DeviceNet Cable System Planning and Installation Manual (publication number ). If you need a copy of this manual, fax the enclosed User Manual Request Card to If you are outside the U.S., fax the card to

† IAONA Industrial Ethernet Planning and Installation Guide † ODVA EtherNet/IP Specification † CSA C Canadian Electric Code for Canadian-based systems. and install a DeviceNetTM network. The remainder of this chapter provides an overview and examples of each step, with references to other sections in this manual for more details. Basic DeviceNet™ Network 1 Understand the media Refer to page 2 Terminate the network Refer to page 3 Supply power Refer to page What’s in This Manual Use this manual to plan and install a DeviceNet ™ cable system. This manual describes the required components of the cable system and how to plan for and install these required components. Who Should ReadThis Manual We assume that you have a fundamental understanding of: •electronics and electrical codes.